4 Mar 2017

Beauty vs. The Beast

by | posted in: Uncategorized | 44,890

It is amazing the posts on my news feed over the hoopla concerning another Disney movie. First Disney has been headed down this road for a while, and we need to quit being surprised. Next, this topic brings up some real discussions, we as Christians need to have. The world sees the hypocrisy in our actions. But this is what happens when we run around telling people “we don’t need to worry about all that theology stuff, we just need to let people know Jesus loves them”. We end up not having any answers or giving poor, if not just wrong, answers to the world’s questions.

So what is the question of the day? It is this… why would Christians boycott Beauty and the Beast when it goes against their values, yet continue to see movies that involve all kinds of other sins; murder, bad language, sex, and more? This is a valid question. And this is how the world sees the argument.

Let’s look at where we agree. I remember when another movie debuted. It was called Magic Mike. This movie did not get the scorn you would expect from the Christians. Instead Facebook news feeds were filled with ladies talking about going to see this movie. These same ladies were posting bible verses the day before. The same argument above works here. Why would you call down condemnation on men for going to the strip club but then justify going to a movie which involved men stripping? I suppose you just use the Playboy argument, “it had a good story”.

The real question being ask is this, why do you justify one sin and condemn another? There is a tendency we have to avoid our own failings and point out the sin in others. This is the meaning of judge not lest ye be judged. Not that we should never judge but that we when we judge we should judge rightly because the same standards will be applied to us. So if we are to boycott a movie like Beauty and the Beast then we should also boycott Magic Mike.

So why don’t we just boycott all movies that contain any sin? There are always distinctions to be made and the distinction is this; both Beauty and the Beast and Magic Mike glorify sin. If a movie contains a murder, it is typically understood that it is wrong and justice is sought by searching for the guilty party, arresting them, and putting them on trial. The fact that a movie contains sin is not a reason not to watch it. The question should be what does the movie say about that sin? The question is not how many cuss words are used. It doesn’t matter if it is 3, 7, or 24, but what is the world view being promoted. Truth is that Christians should probably quit watching most of what is on television and in movies, and read a book. If you need a reference let me know, there is one that has been around a while.

We need to learn to define our worldview and what is important. Christians need to stop defining their worldview based on their own personal preferences. This is what makes it hard to answer the world’s questions. This is how we are hypocritical. We need to learn to rightly define our own sin, as well as sin in general. It is time we take self evaluations and honestly review our own lives. What we watch, what we wear, how we speak and how we spend our time.

Sin is sin is sin. We need to call sin what it is. Truthfully, Christians need to quit justifying their sin and the world needs to quit glorifying their sin. We need to learn that not agreeing is not hate. Truth is true regardless of our emotional reaction. Truth may elicit emotions but they don’t define it. Because I call what you enjoy sin does not mean I hate you. I understand the struggle because I struggle myself. Our sins are different and the same. But sin is sin and we must bring light to the darkness. It is the beast that separates us from our creator but if we turn from it he will redeem us and therein lies true beauty.

44890 Responses

  9. Lee Reyes
    | Reply

    I recently had my screen replaced, and I was amazed at how quickly the repair was done! If you’re looking for reliable phone repair services, check out phone repair for great tips and support

  31. ร้านดอกไม้พร้อมบริการจัดส่ง
    | Reply

    ใครๆ ก็ต้องการดอกไม้ที่สดใหม่และสวยงามสำหรับโอกาสพิเศษ
    ร้านดอกไม้ใกล้ฉันในปัจจุบันมีตัวเลือกและบริการที่ครบครันอย่างน่าประทับใจ ไม่ว่าจะเป็นดอกไม้สดสำหรับวันเกิด ร้านเหล่านี้ช่วยเพิ่มความสะดวกสบายอย่างมาก หากคุณกำลังมองหาดอกไม้สวยๆ ในราคาที่คุ้มค่า ลองค้นหาร้านที่มีรีวิวดีๆ หรือบริการส่งฟรี คุณมีคำแนะนำสำหรับร้านดอกไม้ใกล้ฉันไหม?
    ร้านดอกไม้พร้อมบริการจัดส่ง

  35. Cora Daniel
    | Reply

    Excellent points made highlighting COMMON MISUNDERSTANDINGS WHEN VISITING A DISPOCENERY –IT’S SO IMPORTANT THAT PEOPLE UNDERSTAND WHAT THEY CAN EXPECT BEFOREHAND –CHECK OUT THIS RESOURCE FOR GREAT SUGGESTIONS cannabis store

  40. Jeremyideox
    | Reply

    vibration analyzer

    The Balanset-1A is an advanced portable balancer and vibration analyzer specifically designed for dynamic balancing applications across various industries. With its dual-channel capability, this robust device can perform dynamic balancing in two planes, accommodating a multitude of rotor types including crushers, fans, mulchers, augers on combines, shafts, centrifuges, and turbines. When it comes to achieving high precision and efficiency in vibration measurement and balancing, the Balanset-1A stands out as an essential tool.

    This innovative vibration analyzer is packed with a comprehensive range of features that enhances its functionality. Users can switch between the Vibrometer and Balancing modes based on their needs. The Vibrometer mode permits accurate measurement of rotational speed in RPM, phase determination for vibration signal analysis, and fundamental frequency component analysis. The device also includes an FFT spectrum analysis feature that visualizes the detailed frequency spectrum of vibration signals and provides overall vibration monitoring.

    One of the standout features of the Balanset-1A is its ability to log measurements, allowing users to save and analyze data for further reference. This is particularly useful in industrial settings where continuous monitoring is crucial for maintaining equipment performance.

    In the Balancing mode, the device offers capabilities for both single and two-plane balancing of rotors. Single Plane Balancing minimizes vibration by correcting the rotor in one plane, while Two Plane Balancing achieves a higher level of dynamic balancing. The device’s Polar Graph feature assists operators by visually displaying imbalances, enabling precise weight placement for optimal results. Users can also restore their last session, allowing for quick resumption of previous balancing processes, which significantly enhances operational efficiency.

    An important aspect of the Balanset-1A is its adherence to recognized standards, specifically the ISO 1940. The tolerance calculator included in the device computes acceptable balancing tolerances, ensuring that users can meet industry standards effortlessly. Furthermore, it incorporates a grinding wheel balancing feature that utilizes three counterweights, making it versatile for different applications.

    In addition to its balancing capabilities, the Balanset-1A provides various charts for visual representation of data and trends. Overall charts offer a glimpse into the entire vibration profile, while specific charts focus on fundamental frequency components, harmonic frequencies, and spectrum analysis for detailed investigation.

    User convenience is a top priority for the Balanset-1A, underscored by its archival capacity that enables users to store and retrieve past balancing sessions. This function is meaningful not only for record-keeping but also for ensuring consistency in rotor balancing across serial production environments. The device generates comprehensive reports on balancing outcomes, aiding operators in quality assurance processes.

    From a technical standpoint, the Balanset-1A is equipped with two vibration sensors that ensure effective detection of vibration metrics. The sensors are linked to the device via a cable that can be extended to 10 meters if greater distance is required. Additionally, an optical sensor or laser tachometer is included to provide accurate rotational speed measurements, enhancing the overall analysis capabilities of the device.

    The software integrated with the Balanset-1A serves as a powerful tool for the analysis of vibration data. This software allows users to measure vibrations, determine the phase angles, and calculate the correction mass needed to achieve balance. By connecting the device to a PC, users can access a deeper layer of functionality, enhancing their balancing capabilities.

    The Balanset-1A is designed with flexibility in mind—it can operate with both Imperial and Metric systems, catering to a global user base. This feature ensures that users can work in the measurement system that they are most comfortable with, removing barriers that might arise from unit differences.

    Users can expect the Balanset-1A to operate under a wide range of conditions, evidenced by its impressive specifications. It can measure vibration as a velocity with a range of 0 to 80 mm/s and operates effectively across a frequency range of 5 to 1000 Hz. The device also features a wide range of rotational speed measurements from 250 to 90,000 RPM and can effectively measure phase shifts from 0 to 360 degrees, making it capable of addressing a diverse array of balancing tasks.

    The measurement accuracy is assured with a permissible absolute measurement error for vibration velocity and phase shifts, meaning users can rely on the readings for critical decision-making and maintenance actions. Furthermore, with a weight of just 4 kg, the Balanset-1A maintains portability, enabling operators to take it to various job sites with ease.

    In terms of pricing, the Balanset-1A is competitively priced at €1,751.00, justifying its robust capabilities and advanced features. It’s an investment that supports greater efficiency, longer machinery life, and reduced downtime through effective vibration monitoring and rotor balancing.

    In summary, the Balanset-1A embodies the perfect blend of innovation and practicality, making it an indispensable asset for professionals who need a reliable vibration analyzer. Its ability to handle diverse rotor types, coupled with advanced measurement, analysis, and balancing functionalities, set it apart in the industry. Investing in the Balanset-1A not only enhances operational efficiency but also ensures compliance with international balancing standards, ultimately contributing to superior machinery performance and longevity.

Leave a Reply

Your email address will not be published. Required fields are marked *