9 Nov 2016

So…You think Jesus is king?

by | posted in: Uncategorized | 243,675

With all this election posting on social media, one thing has caught my attention. A lot of people keep posting that Christ is King. If that is so, and I would agree with them, then the question I have is this. Do we realize what making Christ King means for our lives?

The first thing is that is Jesus is king, then he is king over all, whether they have accepted him or not.  This also means he is king over all our politics, business deals, education, and every other part of our lives. To have a king is different than a president or governor. A king has total authority to determine how we shall live. We have a choice to either submit in total to the kings will or live in adversity to him and risk the wrath of the judgment of the king. There is also the third party that gives lip service to the king but ignores his statutes. This is where I argue much of the church is today. We have sought peace from earthly kings and now believe we have elected one. So what now? Now we need to do what we should do regardless who sits in government. We need to cry out to the Lord, “We have sinned, because we have forsaken the Lord and have served the Baals and the Ashtaroth. But now deliver us out of the hand of our enemies, that we may serve you.” (1 Sam. 12:10) “ And now behold the king whom you have chosen, for whom you have asked; behold, the Lord has set a king over you. 14 If you will fear the Lord and serve him and obey his voice and not rebel against the commandment of the Lord, and if both you and the king who reigns over you will follow the Lord your God, it will be well. 15 But if you will not obey the voice of the Lord, but rebel against the commandment of the Lord, then the hand of the Lord will be against you and your king.” (1 Sam. 12:13-15)

We have chosen our earthly king, but he must submit to the authority of God for things to go well with us. But all the cards are not in his lap. It is us who should study to show ourselves approved. Paul tells us in 1 Thessalonians that to be entrusted with the gospel means we must speak not to please man, but to please God. If we have been transformed by the gospel ourselves, then we live by God’s standards and we need to stop trying to change them to match our standards. We must seek out the standards of God and seek to live as salt and light, different from the world and quit assimilating into it. We must seek the standards of God because they will show us the error of our ways and cause us to repent. Repentance is a beautiful thing. It brings us to God and when he pours his mercy and grace on us we have true peace. In God’s kingdom there is freedom, true freedom, the kind that comes from serving a good king. One who does not lay heavy burdens on His people. But this king calls us to go into the world with truth, not with feel goodness but with truth that can sometimes be hard. But it has to begin with each of us individually. We must apply the truth of God to our own lives. Then apply it to our families and finally our churches. That is when we will see the freedom and peace, for ourselves and for our children.

So if you believe God is truly on the throne, then seek the king’s orders. He is a king who loves, a king who died for you, so give your life to serve him in how He commands.

243675 Responses

  2. asshore
    | Reply

    Ꭺttractive section of content. I just stumbled upon your web site and
    in accession capital to assert that I ɑcquiｒe actually enhjoyed
    account your blo posts. Any way I’ll be ѕubscribing to yoᥙr feеds and eｖen I aｃhievement уou acceѕs consistently quickly.

  3. Josefina
    | Reply

    Definitely believe that which you said. Your favorite justification seemed to be on the internet
    the easiest thing to be aware of. I say to you, I certainly get annoyed while
    people think about worries that they plainly don’t know about.
    You managed to hit the nail upon the top and also defined out the whole thing without having side-effects , people can take a signal.
    Will probably be back to get more. Thanks

  6. Victoria
    | Reply

    I pay a quick visit daily а few blogs and informatіon sites
    t᧐ rеad articles, but this web site gіves quality based articles.

    Feel free tо surf to my page … lotto (Victoria)

  13. about
    | Reply

    Hi there to every body, it’s my first go to see of
    this webpage; this webpage consists of awesome and truly good material in support of visitors.

  16. Russell
    | Reply

    I’m still learning from you, while I’m making my way to the top as well. I absolutely enjoy reading everything that is posted on your blog.Keep the information coming. I liked it!

  23. Kit
    | Reply

    POM is often utilized in engineering as it’s excellent for high-precision parts like equipments and also bearings. The very first layer needs a great deal of care as well as focus, as well as the print bed temperature level requires to be high for a preferable outcome. PETG is straightforward, clear, non-brittle, sturdy yet flexible, and also resistant to heats. PETG material has been FDA authorized for food call; however, you should always check the Safety and security Data Sheet on each product as make-ups may vary from product to product. Many customers are delighted with the printing outcomes of these filaments, in addition to their sensible cost (this bundle works out to under $14 for each spool).

    If your task enables it, always choose the minimal number of teeth called for. Below is a much more in-depth overview on how to come close to the layout of equipments for maximum stamina. This can be coupled with lowering or removing cooling entirely, for better layer bond. If this does not function to make your equipments more powerful, nevertheless, you need to do a calibration test.

    Using any one of the methods, you have a possibility of making strong 3D prints or speaking with or interacting with the prototyping solution on exactly how to strengthen 3D printed parts. Modifying the 3D printer settings is not the only method to make a 3D print solid. Other than the epoxy layer, which is a post-processing technique, there are other methods you can use. This is not a straight method of making strong 3D prints as it occurs after printing. It involves using epoxy/polyepoxide to enhance 3D prints. Epoxy layer is an insoluble surface area covering made from a hardener and also epoxy finishing.
    Maintain Your Nozzle Tidy As Well As Purchase Spares
    Supports after that must be disposed of after printing, setting you back time as well as losing plastic. Every so often, every enthusiast wants to 3D print quicker and also make long-wanted figurines and models in a matter of hrs, not days, weeks, or months. Would not it be great if you could speed up 3D prints by 10 times?

    PLA is a great first product to utilize as you are discovering 3D printing due to the fact that it is easy to publish, extremely cost-effective, and also creates parts that can be utilized for a wide variety of applications. It is additionally one of the most eco-friendly filaments on the market today.

    Typically, all FDM filaments have advised printed temperatures based on their melting factor. While publishing rate is influenced by a range of factors, there are a few points you can do to finish the project faster. In 3D printing, a high resolution is identified with highly described prints.
    Prototyping The Difficult To Construct The Tiniest And Also Toughest Robotics In The World
    If you’re examining various forms and ergonomic structures, layout internet or infills into your object to speed up the process. Supporting T-Shapes – Two ‘T’ shaped versions 3D printed with as well as without supports” H” shaped overhangs depend on the dimension of the bridge in between the two vertical geometries. Check your printer and print material to see how long of a bridge you can print without assistances.

    Abdominal can survive outside for some time before UV light deteriorates it, however there’s a steeper understanding curve to print. efficiently with abdominal muscle. You may make use of PLA for your standard models or for indoor, trendy applications, and also reserve abdominal muscle for warmer, useful applications. It is very important to be able to weigh the various advantages and restrictions of different product to choose the filament that will certainly generate the very best 3D print results. If it’s a various product than what was previously loaded, then have actually the temperature level set to whichever print temperature is greater.

    You have no credibility after calling out plastic spindles as bad whilst evaluating … plastic. Prusa’s eye for details decreases to the spools, which use an internal recyclable cardboard core as well as a strong plastic external disk with an useful grove for catching the tail of your filament. Each roll has a QR tag that will certainly give you information of just how and when it was made.

    This lowers print time and also limits product intake. Skirts are the simplest and fastest to publish, but in spite of their name, they don’t really offer any kind of assistance in all. These frameworks are chosen when publishing with materials that have reduced to no attachment problems, however you wish to begin with a smooth flow of filament. Nonetheless, if you’re only publishing a prototype as well as do not actually care about aesthetic appeal, you could intend to use thicker layers. As an example, PETG and also ABS need higher nozzle temperature levels as well as a warmed bed, whereas PLA melts at lower temperatures and also can be published on an unheated develop plate. The LulzBot Mini 2 3D printer is an additional dependable choice for primary schools.
    Usage Similar Materials For Multi-filament Prints
    Reveal the history of 3D printing, preferred hardware, software and the materials needed for successful results. I have actually seen a lot of people saying exactly how crap FreeCAD is as a result of the Topological Naming Issue, yet it’s not that poor. It’s not anywhere near to F360 in security or attribute set but that isn’t to claim it’s a poor item of software application.

  24. Garrett
    | Reply

    If some one needs to be updated with latest technologies after that he must be
    pay a quick visit this web site and be up to date all the time.

  33. satta king
    | Reply

    Simply want to say your article is as astonishing. The clarity in your post is just spectacular and i can assume you’re an expert on this subject.
    Well with your permission let me to grab your feed to keep updated with
    forthcoming post. Thanks a million and please carry
    on the gratifying work.

  39. satta king
    | Reply

    Hello there! This is kind of off topic but I need some help from an established blog.
    Is it tough to set up your own blog? I’m not very techincal but I can figure things out pretty fast.

    I’m thinking about setting up my own but I’m not sure where to start.
    Do you have any ideas or suggestions? With thanks

  40. lotto
    | Reply

    Its ⅼike you гead my mind! You appeɑr t᧐ know a lot abοut this, likе you wrote
    thе book in it or something. I think that you can do with some
    pics tо drive tһe message home a bit, bսt othеr than tһаt, this is
    fantastic blog. A fantastic гead. I’ll definitelʏ be back.

    My blog … lotto

  45. online pharmacies
    | Reply

    Hi there! This article could not be written much better!
    Going through this article reminds me of my previous roommate!
    He constantly kept talking about this. I’ll forward this article to him.
    Pretty sure he’ll have a good read. Thank you for sharing!

  48. bağcılar escort bayan
    | Reply

    Bağcılar ilçesinde hizmet veren, çoğunlukla genç ve orta yaşlı bayanların para karşılığı yaptığı meslektir.
    Bağcılar Escort olarak anal, oral, masaj, ucuz
    vb gibi hizmet için resmi ve güvenilir web site olan http://www.bagcilarescort.com siz ziyaretçilere fotoğraflı
    ve açıklamalı olarak bayan portföyü sunar.

  49. xjeetbuzz.store
    | Reply

    Have you ever thought about including a little bit more than just your articles?
    I mean, what you say is valuable and all. But just imagine if you added some
    great photos or video clips to give your posts more,
    “pop”! Your content is excellent but with pics and videos,
    this site could definitely be one of the greatest in its
    niche. Excellent blog!

Leave a Reply

Your email address will not be published. Required fields are marked *